1. The high bearing capacity
Inflatable type Marine rubber airbag of carrying capacity is the main quality indexes of CB/T 37951996 "on the ship, with water balloon" standard specifies the requirements of the various airbag work pressure and compression ratio under different bearing capacity index per meter.I plant the production of a new generation of airbag due to using the new rubber formula and high tension enhanced fiber, its carrying capacity is beyond standard requires more than double, this means that the "GuTe" Marine rubber airbag on ships, launching operations can be appropriately reduced put balloon number only, at the same time increase the safety and reliability.
2. With high resistance to pressure ability
Air movement under the bottom, it is being squeezed from the bottom and the ground, due to the uneven rolling speed, airbag will produce torsion deformation, this is squeezed and produces torsional deformation of composite phenomenon can be described by "rubbing pressure" movement.When the balloon from rubbing pressure movement, the local capsule wall of airbags can produce buckling, the buckling under the action of concentrated force, multilayer structure of reinforcing fiber capsule wall layered easily torn, lead to increase in capsule than fiber break and cause the balloon burst.
My factory developed a new generation of airbags from two aspects of rubber formulation and production process improvement, improve the structure of the tensile strength, high resistance to pressure ability.
3. The end antiknock design new structure
Air pressure increase, and the integration of a rubber air bag end software have discouraged the possibility of also increased.Airbag after repeated use, once produce leakage phenomenon in the end, under the action of high pressure, the air bag end broke easily hurt.
In air bag launching accident, some airbags, production quality is not high end flew out there have been several hurtful phenomenon, is worth our vigilance.To apply high inner pressure sealing requirement, we used the end antiknock design new structure, strengthen the combination of the capsule body and end software strength and impermeability, apply pressure increase, use has not discouraged, to eliminate the safety hidden trouble.
4. Optimize the structure of the layout
Structure layout optimization principle is in the process of air bag work to determine the size and direction of principal stress, and then adjust the Angle of the layers of cord, achieve capsule wall stress of each layer cord in the general equilibrium, make the efficiency of reinforcing fiber get maximum play.
To this end, we set up the strength of the inflatable type of rubber balloon model, has carried on the compression performance test.Airbags in compression was studied in the process of rolling, the capsule wall size and direction of principal stress change rule, in the best cord layout scheme are designed.New design layout optimization of structure by blasting test and practical use proved to be very successful.
5. Durable aging resistance and wear resistance properties
Marine airbags in very bad work environment, by sunlight exposure, can contact with water, sand and other pollutants.The surface of the balloon must wear-resisting, has the ability to resist water and erosion of all kinds of chemicals and anti-aging ability."GuTe" the high bearing capacity of the Marine rubber airbag substrate using natural rubber as the main raw material, after reasonable formula, add the various accessories, proved by experiments with durable aging resistance and wear resistance properties.
6. A higher flexibility and shock absorption ability
"GuTe" inflatable type Marine rubber airbag, adopt unique whole winding technology and the vulcanization processing "low temperature for a long time".The capsule wall thickness uniformity, without any lap the second joint.Therefore, under the same intensity under the premise of "GuTe" type inflatable rubber balloon can do more thin, soft and elastic.It under the bottom roll, and the bottom of the contact pressure will be more small and uniform, and has higher ability of shock absorption.The ground when using gradient change or discretion not at ordinary times, this soft elastic is conducive to eliminate the structure stress and reduce the risk of launching.
Qingdao Gute shipping supplies co., LTD is a large Rubber fende manufacturers.Product use high quality materials and special explosion-proof technology, has wear-resisting ageing resistance, good air tightness, high intensity, long service life, etc, all products passed the ISO9001:2000 international quality management system certification and China classification society (CCS) quality certification.
Company address: shandong Qingdao jimo (hai jin industrial park),
Company website: www.sdgute.com,
Contact phone: 0532-85509999, fax: 0532-85509888, enterprise QQ: 1405751944.
